Bissell Spinwave Pet Battery Replacement

Автор: Steven Schayer
  • Комментарии: 0
Bissell Spinwave Pet Battery Replacement

Сложность

Easy

Шаги

6

Необходимое время

1 минута

Введение

The Battery for your Bissell Spinwave Pet (model 3347) is by far the most important part of your device. Without your Battery, it doesn't work. So knowing how to replace the battery is very important.

In this guide, i will how you how to quickly and simply remove the battery.

  1. 6NKaRjsFDHEG14vQ
    6NKaRjsFDHEG14vQ
    jyciETSBX6QgGbMJ

    • Place the Bissell Spinwave pet upside down.

  2. LHUEe4SYvGqi4HAp

    • Use a Phillips #00 screwdriver to remove both screws.

  3. FvHRZoRpnkkVnwgE
    FvHRZoRpnkkVnwgE
    iixmQY2ELcjrqluj

    • Remove the two secondary brushes.

  4. tqHJVK1AUMEIKOxl
    tqHJVK1AUMEIKOxl
    XImwMhVmqN6DRt2k

    • Use a Phillips #00 screwdriver to remove the two screws from the battery panel.

  5. Q5AxmRAnd1eOSNUd

    • Remove the battery cover.

    • If the battery cover is difficult to remove, use a spudger to gently lift the edge before attempting again.

    • Pick up the battery from the compartment.

  6. w24JimQaYH2LSBCS
    w24JimQaYH2LSBCS
    HeDjbjWrufJ6UVyJ

    • Squeeze the tab against the connector and pull the two sides apart to disconnect the battery.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Steven Schayer

Участник c: 24/10/24

293 Репутация

0 комментариев