Hover-1 Liberty Battery Replacement

Автор: Patrick Bacon
  • Комментарии: 1
Hover-1 Liberty Battery Replacement

Сложность

Easy

Шаги

7

Необходимое время

15 - 20 минут

Введение

If your Hover-1 Liberty is not holding a charge and there is no problem with the charging cord, then the battery needs to be replaced. In this guide, the side of the hoverboard with the words Hover-1 printed on it will be referred to as the right side.

  1. jcPCxhJpPfMStuAQ
    jcPCxhJpPfMStuAQ
    ZORU3xWa2R6fI6rK

    • Flip the hoverboard over so the labels are facing upwards.

    • Remove the twenty 18mm screws using a Phillips #2 screwdriver and twisting counterclockwise.

  2. AmZ1SxCMDK6bWdQU
    AmZ1SxCMDK6bWdQU
    bdRoFh53ESwwT6OF

    • Remove the bottom cover by lifting it away from the hoverboard.

    • The cover on the side without the battery has two wires connecting the power button and charging port.

  3. kiH511JZEkUZFAhW
    kiH511JZEkUZFAhW
    HGKwKvtevT6klLSO
    BPlALJxnQrsabnPP

    • Remove one connector from the non-battery side circuit board.

    • Remove the next connector from the non-battery side circuit board.

    • To remove the connectors, pinch the plug and pull away from the circuit board.

    Which does brakes

    Fabian Rodriguez -

  4. krtAwO4pN5LJEG22
    krtAwO4pN5LJEG22
    mQnpuYlCsVYvbXDC

    • Disconnect the large red and black wire from the battery by pulling apart the connector.

  5. 6ZpSX2TA6TaB5Wgw
    6ZpSX2TA6TaB5Wgw
    IhTCsLZjORx2T5xM

    • Remove the four 15mm Phillips #1 screws from the bracket holding the battery in place.

  6. VVnAIAFXkuqcCUKf
    VVnAIAFXkuqcCUKf
    kvXveQwIMnvusrHh

    • Remove the bracket by pulling it upwards, away from the hoverboard.

    • You will need to move some wires aside to remove the bracket successfully.

  7. Aa3TW2LkUFg1CJbk
    Aa3TW2LkUFg1CJbk
    vW2FOMDsvARTKbdw
    iAMatvuLJMpMGg3s

    • Remove the battery by grasping the battery and hoverboard firmly and pulling apart.

    • The battery is held in place by adhesive. So, some force is required to remove it.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Patrick Bacon

Участник c: 08/10/18

411 Репутация

0 комментариев