Krups 963 Bottom Panel Removal

Автор: Wyatt Hall
  • Комментарии: 0
Krups 963 Bottom Panel Removal

Сложность

Moderate

Шаги

3

Необходимое время

Нет оценки

Введение

Prerequisite Only

  1. TRwPn3lNRfqKraOu

    • Make sure the device is unplugged before continuing.

    • Use a Phillips size 2 screwdriver to remove the four 12mm screws found on the bottom of the machine.

  2. vTFNuiKQV5ITIXRw

    • Remove the single black Phillips size 0 10mm length screw on the back of the machine.

  3. U5XGlBd1IQmyLPTT

    • Remove the bottom cover from the machine and slide it down the power cord.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Wyatt Hall

Участник c: 13/10/14

866 Репутация

0 комментариев