Razor Hovertrax 2.0 Anti-Slip Pads Replacement

Автор: Dang Nguyen
  • Комментарии: 0
Razor Hovertrax 2.0 Anti-Slip Pads Replacement

Сложность

Moderate

Шаги

2

Необходимое время

2 - 5 минут

Введение

The anti-slip pads are built in to stop your feet from slipping off the Hovertrax board and losing control of the wheel motors.

Инструменты

  1. hLDSdmTm52YcLuyZ

    • Choose an area to access and slip the Jimmy blade to pry open the pad.

    • We recommend prying the pad open from the top and bottom instead of the sides due to the plastic wheel cover blocking the access point.

  2. 1KoxnSe6Dx12gASt

    • After using the Jimmy tool to open up the area, use your hands and slowly peel off the adhesive from the pad and board.

    • You may be required to remove the remaining adhesive on the board.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Dang Nguyen

Участник c: 08/09/23

217 Репутация

0 комментариев