iRobot Roomba 805 Wheel Replacement

Автор: Grady Landers
  • Комментарии: 0
iRobot Roomba 805 Wheel Replacement

Сложность

Easy

Шаги

2

Необходимое время

4 минут

Введение

This guide will go over how to clean or replace the wheels in your iRobot Roomba 805. If you plan on replacing either wheel you can get a new one from iRobot. A Phillips head screwdriver is needed to follow this guide.

  1. k6HpFylnQ15DIMwI
    k6HpFylnQ15DIMwI
    3fdfA1GAOoVTPicU

    • Remove the battery panel, then remove the two screws behind the wheels, and lift the bottom panel apart from the rest of the device.

  2. XIYfNWm1jPUkYn2o
    XIYfNWm1jPUkYn2o
    un1sJwyAtXWd2MjW
    KnRIrBbwqNSpgtQG

    • Remove the three screws holding the wheel to the chassis and pull it out.

    • Keep in mind the two wheels are symmetrical, so you can follow these steps for either.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Grady Landers

Участник c: 05/11/19

617 Репутация

0 комментариев